•  

    Lindstrom...Stubby Straight Nose Flat Pliers

    $53.00 USD

    New from Lindstrom...Stubby Straight Nose Flat Pliers for Chainmaille! Features include: Strong blades for heavier wire bending operations. Short blade design for greater control and leverage. ESD Safe Handle. Patented adjustable Bio-Spring reduces fatigue. Precision screw joint maximizing tool life. Radius edges minimize damage to wire. Applications include: Chainmaille assembly. Opening and closing jump rings. Forming and bending sheet. Soft and hard wire forming, bending and shaping.

  •  

    Lindstrom...Stubby Angled Flat Nose Pliers

    $55.00 USD

    New from Lindstrom...Stubby Angled Flat Nose Pliers for Chainmaille! Features: Strong blades for heavier wire bending operations. Short blade design for greater control and leverage. ESD Safe Handles. Patented adjustable Bio-Spring reduces fatigue. Precision screw joint maximizing tool life. Radius edges minimize damage to wire. Applications include: Chainmaille assembly. Opening and closing jump rings. Forming and bending sheet. Soft and hard wire forming, bending and shaping.

  •  

    Gem setting Pliers

    $35.00 USD

    Safely set stones with minimum effort and maximum control. Gemsetting pliers close with a parallel motion so even pressure is applied when closing prongs and thus reduces the chance of damage to the stone. Jaws are easily adjusted by turning the opening adjustment wheel. 10:1 lever ratio allows you to set stones with less force than required with conventional pliers. The adjustment screw allows precise movement predetermined distance set by the jeweler. Works well with prongs and settings of all sizes and shapes. Easy to control and grip with the lever-action handle and limited travel distance. Simply adjust to fit the prong. Then gently squeeze to bend the prongs. 

  •  

    PARALLEL PLIER W/ NYLON JAWS

    $29.00 USD

    Parallel action provides even pressure while holding firm. The durable nylon will prevent marring, scratches or damage to the piece being held. Spring action and knurled grip add comfort and ease of use. Replacement jaws available (PLR-864.05). Length 5-1/2 inches. Jaw opening measures 3/8 inch.

  •  

    EURO POWER PUNCH PLIER

    $35.00 USD

    The EuroPower Punch Plier packs a big punch. Let the tool do all the work with the specially designed compound action and hardened cutting dies - punch through thick metal with ease. Rated for up to 16 gauge. Lightweight carrying case with handle. Cutting dies and punches made of hardened steel. Each punch and die is individually marked with size for ease and accuracy. Replacement punch and die sets available. 7 popular sizes in one plier: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32.

  •  

    Prong Lifting Pliers

    $25.00 USD

    These are the original! I have a shipment in transit to me. These are great for lifting prongs and protect the prongs. Great if you want to pull that diamond and put another stone in its place.

     

    A revolutionary idea! A plier for opening prongs which will not fracture stones. The user has total control no matter what size prong. The plier puts no pressure on the top of the stone. Top jaw is a claw which grips the prong cleanly and the lower jaw is grooved to hold the prong. Made in Germany. Length 4-1/2" (115mm).

  •  

    MILAND ACCU-SHEAR FOR HEAVY WIRE

    $45.00 USD

    Miland® Accu-Shear has true shear action for large wire up to 6 gauge. Leaves both ends flush and eliminates waste and the need for filing. Adjustable stop allows for multiple cuts of the same length without measuring each time. Can also be used without the stop. A EURO TOOL exclusive. Overall length: 8"

  •  

    MILAND ANTI-CLASTIC PLIERS- 9/16

    $45.00 USD

    Miland® Anticlastic pliers are similar to synclastic but produce a curve in opposite ways in two directions (saddle-shaped). Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Total length: 8".

  •  

    MILAND ANTI-CLASTIC PLIERS- 7/16

    $45.00 USD

    Miland® Anti-clastic pliers are similar to synclastic but produce a concave curve instead of convex. Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Channel Width: 7/16". Overall length: 8-1/4".

  •  

    MILAND SYNCLASTIC PLIERS- 1/2

    $45.00 USD

    Miland® Synclastic pliers put a curve toward the same side in all directions. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair. Length 8".

  •  

    MILAND SYNCLASTIC PLIERS- 5/16

    $25.00 USD

    Synclastic pliers put two curvatures into flat stock simultaneously without marring. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair work. Channel Width: 5/16". Overall length: 8-1/4".

  •  

    MILAND DOUBLE CYLINDER BRACELET- 3/4

    $25.00 USD

    Miland® Double Cylinder Bracelet Pliers have two different sized cylinders are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 3/4" and 1" in diameter.

  •  

    MILAND DOUBLE CYLINDER BRACELET- 1-3/8

    $25.00 USD

    Miland® Double Cylinder Bracelet Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 1" and 1-3/8" in diameter.

  •  

    MILAND DOUBLE CYLINDER BRACELET- 1-3/8

    $25.00 USD

    Miland® Double Cylinder Bracelet Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 1-3/8" and 1-5/8" in diameter.

  •  

    MILAND DOUBLE CYLINDER RING- 5/8

    $25.00 USD

    Miland® Double Cylinder Ring Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 5/8" and 3/4" in diameter.

  •  

    MILAND DOUBLE CYLINDER RING- 5/8

    $25.00 USD

    Miland Double Cylinder Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets or rings. Cylinders measure 5/8" and 1" in diameter.

  •  

    MILAND CHANNEL BRACELET MAKER- RND/HALF RND 1-3/8

    $25.00 USD

    Put a clean, consistent, large radius curve into flat metal stock with our 1-3/8" Miland® Channel Ring Maker pliers. Can easily be resized on a mandrel. Perfect for making men's or women's bracelets and jewelry repair. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming. Length: 6-1/2".

  •  

    MILAND CHANNEL RING MAKER- RND/HALF RND 3/4

    $25.00 USD

    Put a clean, consistent radius curve into flat metal stock with our 3/4" Miland® Channel Ring Maker pliers. Can easily be resized on a mandrel. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming. Length: 6-1/2". 

  •  

    MILAND CYLINDER ANTI-CLASTIC 2 X 3/8 CHANNEL

    $45.00 USD

    Miland® Cylinder Anti-Clastic Pliers have a unique full steel ring that may be used with thumb to create tight curvatures more easily. Perfect for making bracelets, rings, bangles, hoops and is indispensable for doing jewelry repair work. Cylinder diameter: 2". Channel Width: 3/8". Overall length: 8-1/4".

  •  

    MILAND CYLINDER ANTI-CLASTIC 1 1/8 x 1/4 CHANNEL

    $45.00 USD

    Miland® Cylinder Anti-Clastic Pliers have a unique full steel ring that may be used with the thumb to create tight curvatures more easily. Perfect for making bracelets, rings, bangles, hoops and is indispensable for doing jewelry repair work. Cylinder diameter: 1-1/8". Channel Width: 1/4". Overall length: 8-1/4".

  •  

    WRAP N' TAP LOOPING PLIER 19MM

    $33.00 USD

    A revolutionary idea, simple, yet extremely effective, invented and patented by a master jeweler. We call them Wrap 'n' Tap Ring Looping Pliers, because the jeweler can wrap ring stock around the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring, half or quarter shank for repair. This 19mm barrel is perfect for gents’ rings. Pliers are especially good for hollow rings and rings with a design on one side, because the lower jaw is covered with PVC tubing and cannot scratch or mar. You get a perfect circle time after time, with stock up to 2mm thick. Made of stainless steel with PVC cushion grips. Length 6" (150mm).

  •  

    WRAP N' TAP LOOPING PLIER 14MM

    $33.00 USD

    A revolutionary idea, simple, yet extremely effective, invented and patented by a master jeweler. We call them Wrap 'n' Tap Ring Looping Pliers, because the jeweler can wrap ring stock around the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring, half or quarter shank for repair. This 14mm barrel is perfect for ladies’ rings. Pliers are especially good for hollow rings and rings with a design on one side, because the lower jaw is covered with PVC tubing and cannot scratch or mar. You get a perfect circle time after time, with stock up to 2mm thick. Made of stainless steel with PVC cushion grips. Length 6" (150mm).

  •  

    MULTI-SIZED WRAP N' TAP LG. 13,16,20,MM

    $39.00 USD

    Wrap ‘n’ Tap Pliers offer the user greater versatility. With the 13, 16, and 20mm barrel, you can shape rings as well as make loops in many sizes. Pliers are especially good for looping stock that has a pattern, or hollow stock. 6-1/2" (165mm) in length, the Multi-size Wrap ‘n’ Tap pliers feature cushion grips and are made of stainless steel. 

  •  

    MULTI-SIZED WRAP N' TAP SM. 5,7,10,MM

    $39.00 USD

    Wrap ‘n’ Tap Pliers offer the user greater versatility. With the 5, 7, and 10mm barrel, you can shape rings as well as make loops in many sizes. Pliers are especially good for looping stock that has a pattern, or hollow stock. 6-1/2" (165mm) in length, the Multi-size Wrap ‘n’ Tap pliers feature cushion grips and are made of stainless steel. 

  •  

    XURON 9200F MICRO-SHEAR W/RETAINER - TAPERED

    $25.00 USD

    The next generation Micro-Shear® Flush Cutter with Wire Retaining Clip and tapered head is manufactured from tough alloy steel with state-of-the-art heat treatment and precise CNC grinding creating the ultimate shear cutter. The unique wire retaining clip holds the cut wire to keep it from flying across the room. Designed for use on soft wire up to 16 gauge. Comfort grip handles and gentle return springs assure hours of fatigue-free use. Length 5 inches (125mm).

  •  

    XURON 170-II MICRO-SHEAR FLUSH CUTTER

    $19.00 USD

    The original Micro-Shear® Flush Cutter is ergonomically sized and shaped to fit comfortably in the hand. Ultra slim profile increases access into high density areas. Cuts soft wire up to 18 gauge (1mm). Overall length: 4-3/4".

  •  

    XURON 450 CHAIN/TWEEZER NOSE PLIER

    $19.00 USD

    Xuron's Tweezer Nose™ plier has fine blades that are precise, and match perfectly in alignment, size and shape. Capable of picking up and holding delicate parts while strong enough to form and bend wire. Features soft rubber grips and a gentle return spring for increased comfort and reduced hand fatigue. Overall length: 5-3/8".

  •  

    SHEAR CUTTER-ITALIAN

    $15.00 USD

    New Italian cutter, made of high grade tool steel is perfect for lighter jobs were a flush cut is essential. This cutter, made in Italy features a blackened non-glare head, return spring and high friction ergonomic grips. Maximum cut is 16 gauge 1.5mm copper wire. Length 5-1/2" (140mm).

  •  

    German PLIER 4-1/2 inch

    $35.00 USD

    EURO TOOL’s premium-quality box-joint pliers are the most popular size used by professionals for fine work. Each lightweight German-made plier has been superbly polished. They are made of the highest quality steel and feature blue vinyl-coated handles. Double-leaf springs for smooth and comfortable operation. Cutters in this series have a Rockwell hardness of 58.

  •  

    2K ECCO Pliers

    $15.00 USD

    Our 2K Ecco pliers are excellent for those who desire quality at a modest price. Made of stainless steel with double-leaf springs, the handles feature a non-slip ergonomic-style grip for excellent comfort and control. Pliers have a brush finish, non-glare surface and box joint for years of service. Length 5 inches (130mm).

  •  

    OMTARA CRIMPER

    $39.00 USD

    The OmTara Crimping Pliers make the crimping process easier, more efficient, and more fool proof, and they support the artist's creative process rather than inhibit it. An easy one step process to achieve a secure crimp which can then be left as is, folded or flattened, or covered with a crimp cover. For use with crimps from 1 to 4 mm diameter.

  •  

    MIGHTY CRIMPER

    $15.00 USD

    The Mighty Crimper was developed for larger beads of 3mm diameter, and is exceptionally handy for closing crimp ends, eyelet ends, cap end, pinch clasps  and crimp covers. Because of the rounded jaws, it will leave no marks or flat spots. Because of its larger size, the Mighty Crimper is made of slightly thicker steel, giving it 2.2mm wide jaws which are precision milled. Length: 5-1/4" (135mm).

  •  

    MICRO CRIMPER

    $15.00 USD

    The Micro Crimper is also an adaptation of the Original Crimper, to be used with 1mm size crimps. It too has precision ground jaws, which are slightly thinner for the smaller crimps which have become popular with the introduction of finer wire. Length: 5" (125mm).

  •  

    BEAD CRIMPING PLIER

    $12.00 USD

    Original Bead Crimper for beads from 2 to 3 mm which works with either tube crimps or round crimps.

 

[ Previous Page / 1 / Next Page ]

  • Lindstrom...Stubby Straight Nose Flat Pliers

    $53.00 USD

    New from Lindstrom...Stubby Straight Nose Flat Pliers for Chainmaille! Features include: Strong blades for heavier wire bending operations. Short blade design for greater control and leverage. ESD Safe Handle. Patented adjustable Bio-Spring reduces fatigue. Precision screw joint maximizing tool life. Radius edges minimize damage to wire. Applications include: Chainmaille assembly. Opening and closing jump rings. Forming and bending sheet. Soft and hard wire forming, bending and shaping.

  • Lindstrom...Stubby Angled Flat Nose Pliers

    $55.00 USD

    New from Lindstrom...Stubby Angled Flat Nose Pliers for Chainmaille! Features: Strong blades for heavier wire bending operations. Short blade design for greater control and leverage. ESD Safe Handles. Patented adjustable Bio-Spring reduces fatigue. Precision screw joint maximizing tool life. Radius edges minimize damage to wire. Applications include: Chainmaille assembly. Opening and closing jump rings. Forming and bending sheet. Soft and hard wire forming, bending and shaping.

  • Gem setting Pliers

    $35.00 USD

    Safely set stones with minimum effort and maximum control. Gemsetting pliers close with a parallel motion so even pressure is applied when closing prongs and thus reduces the chance of damage to the stone. Jaws are easily adjusted by turning the opening adjustment wheel. 10:1 lever ratio allows you to set stones with less force than required with conventional pliers. The adjustment screw allows precise movement predetermined distance set by the jeweler. Works well with prongs and settings of all sizes and shapes. Easy to control and grip with the lever-action handle and limited travel distance. Simply adjust to fit the prong. Then gently squeeze to bend the prongs. 

  • PARALLEL PLIER W/ NYLON JAWS

    $29.00 USD

    Parallel action provides even pressure while holding firm. The durable nylon will prevent marring, scratches or damage to the piece being held. Spring action and knurled grip add comfort and ease of use. Replacement jaws available (PLR-864.05). Length 5-1/2 inches. Jaw opening measures 3/8 inch.

  • EURO POWER PUNCH PLIER

    $35.00 USD

    The EuroPower Punch Plier packs a big punch. Let the tool do all the work with the specially designed compound action and hardened cutting dies - punch through thick metal with ease. Rated for up to 16 gauge. Lightweight carrying case with handle. Cutting dies and punches made of hardened steel. Each punch and die is individually marked with size for ease and accuracy. Replacement punch and die sets available. 7 popular sizes in one plier: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32.

  • Prong Lifting Pliers

    $25.00 USD

    These are the original! I have a shipment in transit to me. These are great for lifting prongs and protect the prongs. Great if you want to pull that diamond and put another stone in its place.

     

    A revolutionary idea! A plier for opening prongs which will not fracture stones. The user has total control no matter what size prong. The plier puts no pressure on the top of the stone. Top jaw is a claw which grips the prong cleanly and the lower jaw is grooved to hold the prong. Made in Germany. Length 4-1/2" (115mm).

  • MILAND ACCU-SHEAR FOR HEAVY WIRE

    $45.00 USD

    Miland® Accu-Shear has true shear action for large wire up to 6 gauge. Leaves both ends flush and eliminates waste and the need for filing. Adjustable stop allows for multiple cuts of the same length without measuring each time. Can also be used without the stop. A EURO TOOL exclusive. Overall length: 8"

  • MILAND ANTI-CLASTIC PLIERS- 9/16

    $45.00 USD

    Miland® Anticlastic pliers are similar to synclastic but produce a curve in opposite ways in two directions (saddle-shaped). Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Total length: 8".

  • MILAND ANTI-CLASTIC PLIERS- 7/16

    $45.00 USD

    Miland® Anti-clastic pliers are similar to synclastic but produce a concave curve instead of convex. Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Channel Width: 7/16". Overall length: 8-1/4".

  • MILAND SYNCLASTIC PLIERS- 1/2

    $45.00 USD

    Miland® Synclastic pliers put a curve toward the same side in all directions. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair. Length 8".

  • MILAND SYNCLASTIC PLIERS- 5/16

    $25.00 USD

    Synclastic pliers put two curvatures into flat stock simultaneously without marring. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair work. Channel Width: 5/16". Overall length: 8-1/4".

  • MILAND DOUBLE CYLINDER BRACELET- 3/4

    $25.00 USD

    Miland® Double Cylinder Bracelet Pliers have two different sized cylinders are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 3/4" and 1" in diameter.

  • MILAND DOUBLE CYLINDER BRACELET- 1-3/8

    $25.00 USD

    Miland® Double Cylinder Bracelet Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 1" and 1-3/8" in diameter.

  • MILAND DOUBLE CYLINDER BRACELET- 1-3/8

    $25.00 USD

    Miland® Double Cylinder Bracelet Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 1-3/8" and 1-5/8" in diameter.

  • MILAND DOUBLE CYLINDER RING- 5/8

    $25.00 USD

    Miland® Double Cylinder Ring Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets. Cylinders measure 5/8" and 3/4" in diameter.

  • MILAND DOUBLE CYLINDER RING- 5/8

    $25.00 USD

    Miland Double Cylinder Pliers have two different sized cylinders that are used to quickly put large radius curves into flat metal stock. Result can easily be resized on a mandrel if desired. Perfect for making mens' and womens' bracelets or rings. Cylinders measure 5/8" and 1" in diameter.

  • MILAND CHANNEL BRACELET MAKER- RND/HALF RND 1-3/8

    $25.00 USD

    Put a clean, consistent, large radius curve into flat metal stock with our 1-3/8" Miland® Channel Ring Maker pliers. Can easily be resized on a mandrel. Perfect for making men's or women's bracelets and jewelry repair. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming. Length: 6-1/2".

  • MILAND CHANNEL RING MAKER- RND/HALF RND 3/4

    $25.00 USD

    Put a clean, consistent radius curve into flat metal stock with our 3/4" Miland® Channel Ring Maker pliers. Can easily be resized on a mandrel. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming. Length: 6-1/2". 

  • MILAND CYLINDER ANTI-CLASTIC 2 X 3/8 CHANNEL

    $45.00 USD

    Miland® Cylinder Anti-Clastic Pliers have a unique full steel ring that may be used with thumb to create tight curvatures more easily. Perfect for making bracelets, rings, bangles, hoops and is indispensable for doing jewelry repair work. Cylinder diameter: 2". Channel Width: 3/8". Overall length: 8-1/4".

  • MILAND CYLINDER ANTI-CLASTIC 1 1/8 x 1/4 CHANNEL

    $45.00 USD

    Miland® Cylinder Anti-Clastic Pliers have a unique full steel ring that may be used with the thumb to create tight curvatures more easily. Perfect for making bracelets, rings, bangles, hoops and is indispensable for doing jewelry repair work. Cylinder diameter: 1-1/8". Channel Width: 1/4". Overall length: 8-1/4".

  • WRAP N' TAP LOOPING PLIER 19MM

    $33.00 USD

    A revolutionary idea, simple, yet extremely effective, invented and patented by a master jeweler. We call them Wrap 'n' Tap Ring Looping Pliers, because the jeweler can wrap ring stock around the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring, half or quarter shank for repair. This 19mm barrel is perfect for gents’ rings. Pliers are especially good for hollow rings and rings with a design on one side, because the lower jaw is covered with PVC tubing and cannot scratch or mar. You get a perfect circle time after time, with stock up to 2mm thick. Made of stainless steel with PVC cushion grips. Length 6" (150mm).

  • WRAP N' TAP LOOPING PLIER 14MM

    $33.00 USD

    A revolutionary idea, simple, yet extremely effective, invented and patented by a master jeweler. We call them Wrap 'n' Tap Ring Looping Pliers, because the jeweler can wrap ring stock around the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring, half or quarter shank for repair. This 14mm barrel is perfect for ladies’ rings. Pliers are especially good for hollow rings and rings with a design on one side, because the lower jaw is covered with PVC tubing and cannot scratch or mar. You get a perfect circle time after time, with stock up to 2mm thick. Made of stainless steel with PVC cushion grips. Length 6" (150mm).

  • MULTI-SIZED WRAP N' TAP LG. 13,16,20,MM

    $39.00 USD

    Wrap ‘n’ Tap Pliers offer the user greater versatility. With the 13, 16, and 20mm barrel, you can shape rings as well as make loops in many sizes. Pliers are especially good for looping stock that has a pattern, or hollow stock. 6-1/2" (165mm) in length, the Multi-size Wrap ‘n’ Tap pliers feature cushion grips and are made of stainless steel. 

  • MULTI-SIZED WRAP N' TAP SM. 5,7,10,MM

    $39.00 USD

    Wrap ‘n’ Tap Pliers offer the user greater versatility. With the 5, 7, and 10mm barrel, you can shape rings as well as make loops in many sizes. Pliers are especially good for looping stock that has a pattern, or hollow stock. 6-1/2" (165mm) in length, the Multi-size Wrap ‘n’ Tap pliers feature cushion grips and are made of stainless steel. 

  • XURON 9200F MICRO-SHEAR W/RETAINER - TAPERED

    $25.00 USD

    The next generation Micro-Shear® Flush Cutter with Wire Retaining Clip and tapered head is manufactured from tough alloy steel with state-of-the-art heat treatment and precise CNC grinding creating the ultimate shear cutter. The unique wire retaining clip holds the cut wire to keep it from flying across the room. Designed for use on soft wire up to 16 gauge. Comfort grip handles and gentle return springs assure hours of fatigue-free use. Length 5 inches (125mm).

  • XURON 170-II MICRO-SHEAR FLUSH CUTTER

    $19.00 USD

    The original Micro-Shear® Flush Cutter is ergonomically sized and shaped to fit comfortably in the hand. Ultra slim profile increases access into high density areas. Cuts soft wire up to 18 gauge (1mm). Overall length: 4-3/4".

  • XURON 450 CHAIN/TWEEZER NOSE PLIER

    $19.00 USD

    Xuron's Tweezer Nose™ plier has fine blades that are precise, and match perfectly in alignment, size and shape. Capable of picking up and holding delicate parts while strong enough to form and bend wire. Features soft rubber grips and a gentle return spring for increased comfort and reduced hand fatigue. Overall length: 5-3/8".

  • SHEAR CUTTER-ITALIAN

    $15.00 USD

    New Italian cutter, made of high grade tool steel is perfect for lighter jobs were a flush cut is essential. This cutter, made in Italy features a blackened non-glare head, return spring and high friction ergonomic grips. Maximum cut is 16 gauge 1.5mm copper wire. Length 5-1/2" (140mm).

  • German PLIER 4-1/2 inch

    $35.00 USD

    EURO TOOL’s premium-quality box-joint pliers are the most popular size used by professionals for fine work. Each lightweight German-made plier has been superbly polished. They are made of the highest quality steel and feature blue vinyl-coated handles. Double-leaf springs for smooth and comfortable operation. Cutters in this series have a Rockwell hardness of 58.

  • 2K ECCO Pliers

    $15.00 USD

    Our 2K Ecco pliers are excellent for those who desire quality at a modest price. Made of stainless steel with double-leaf springs, the handles feature a non-slip ergonomic-style grip for excellent comfort and control. Pliers have a brush finish, non-glare surface and box joint for years of service. Length 5 inches (130mm).

  • OMTARA CRIMPER

    $39.00 USD

    The OmTara Crimping Pliers make the crimping process easier, more efficient, and more fool proof, and they support the artist's creative process rather than inhibit it. An easy one step process to achieve a secure crimp which can then be left as is, folded or flattened, or covered with a crimp cover. For use with crimps from 1 to 4 mm diameter.

  • MIGHTY CRIMPER

    $15.00 USD

    The Mighty Crimper was developed for larger beads of 3mm diameter, and is exceptionally handy for closing crimp ends, eyelet ends, cap end, pinch clasps  and crimp covers. Because of the rounded jaws, it will leave no marks or flat spots. Because of its larger size, the Mighty Crimper is made of slightly thicker steel, giving it 2.2mm wide jaws which are precision milled. Length: 5-1/4" (135mm).

  • MICRO CRIMPER

    $15.00 USD

    The Micro Crimper is also an adaptation of the Original Crimper, to be used with 1mm size crimps. It too has precision ground jaws, which are slightly thinner for the smaller crimps which have become popular with the introduction of finer wire. Length: 5" (125mm).

  • BEAD CRIMPING PLIER

    $12.00 USD

    Original Bead Crimper for beads from 2 to 3 mm which works with either tube crimps or round crimps.

 

[ Previous Page / 1 / Next Page ]

This website is created and hosted by Website.com's Site Builder.